This robust 0.394-inch thick polycarbonate sheet offers superior impact resistance and clarity, making it ideal for demanding suspending and bracing applications. Its engineered strength ensures reliable performance in challenging environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.394" |
| Length | 43" |
| Width | 15" |
Manufactured under strict quality controls, this 0.394" thick polycarbonate stock sheet measures 43" in length and 15" in width. Polycarbonate is renowned for its exceptional impact strength, exceeding that of glass and acrylic, while maintaining excellent optical clarity. Its high tensile strength and rigidity make it perfectly suited for load-bearing suspending and bracing applications, ensuring structural integrity and long-term durability. This material offers a wide service temperature range and good chemical resistance, further enhancing its suitability for industrial and commercial uses.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Accurately mark and pre-drill all mounting holes in the polycarbonate sheet, using appropriate drill bits for plastic to prevent stress cracking. 3. Securely fasten the sheet to the mounting surface using specified hardware, ensuring even pressure distribution across all fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, leading to stress concentration and potential cracking. | Maintain a minimum edge distance of at least 2 times the fastener diameter when drilling holes. |
| Over-tightening fasteners, causing excessive pressure on the polycarbonate and potential deformation or cracking. | Use washers and tighten fasteners only until snug, allowing for thermal expansion. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards and enclosures, Structural bracing components, Industrial shelving and supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||