Engineered for demanding applications, this 0.394-inch thick Nylon stock sheet offers exceptional self-lubricating properties, low friction, and superior wear resistance for custom-machined components.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.394" |
| Length | 41" |
| Width | 14" |
Specified by design engineers worldwide, this lubricating grade Nylon stock sheet boasts a precise thickness of 0.394 inches, a generous length of 41 inches, and a width of 14 inches. Its inherent low coefficient of friction and excellent abrasion resistance make it ideal for components subjected to continuous movement and high stress. The material's ability to withstand moderate chemical exposure and its good impact strength further enhance its suitability for a wide range of industrial and mechanical applications where reduced wear and efficient operation are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to the required dimensions using appropriate tooling for nylon. 2. Machine components to precise tolerances, ensuring adequate lubrication during the process. 3. Install finished parts, verifying smooth operation and proper fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymer machining. | Employ carbide-tipped or specialized router bits designed for plastics to prevent melting and ensure clean cuts. |
| Overheating the material during machining, leading to deformation. | Utilize adequate coolant and optimize cutting speeds and feed rates to manage heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Low-friction bearing surfaces, Wear pads and guides, Gears and sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||