This robust carbon steel stock sheet, measuring 0.394 inches thick, 12 inches in length, and 25 inches in width, is engineered for demanding measuring and inspecting tasks. Its substantial gauge and material ensure exceptional stability and durability.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.394" |
| Length | 12" |
| Width | 25" |
Precision-manufactured to tight tolerances, this carbon steel stock sheet offers a nominal thickness of 0.394 inches (10mm), a length of 12 inches (305mm), and a width of 25 inches (635mm). Constructed from high-grade carbon steel, it exhibits excellent rigidity, wear resistance, and thermal stability, crucial for applications demanding accuracy and longevity. The material's inherent hardness prevents deformation under load, ensuring consistent performance in metrology, jig and fixture construction, and layout work. Surface finish is optimized for minimal friction and enhanced readability of markings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface where the sheet will be placed is clean, level, and free of debris. 2. Carefully position the carbon steel stock sheet onto the prepared surface, aligning it with any existing guides or mounting points. 3. Secure the sheet using appropriate fasteners (e.g., countersunk screws) through pre-drilled holes or designated mounting areas, if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the sheet on an uneven surface, leading to inaccurate measurements. | Always verify and prepare a perfectly level and stable mounting surface before installing or using the stock sheet. |
| Applying excessive force or impact to the sheet, causing potential damage or deformation. | Handle the stock sheet with care and avoid dropping or subjecting it to heavy impacts. Use appropriate tools for any modifications. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Precision layout and marking tables, Base plates for inspection fixtures and gauges, Work surfaces for precision machining and assembly.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||