Engineered for superior impact resistance and optical clarity, this 0.392" thick polycarbonate sheet is a premier safety material. Its robust construction ensures protection in high-risk environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.392" |
| Length | 25" |
| Width | 41" |
Specified by design engineers worldwide, this 0.392" thick polycarbonate stock sheet offers exceptional impact strength, exceeding that of glass and acrylic by significant margins. Its inherent toughness and excellent optical clarity make it ideal for protective glazing and machine guards. The material exhibits a wide service temperature range and good UV resistance, ensuring long-term performance in diverse operational settings. Dimensions are precisely controlled at 25 inches in width and 41 inches in length for consistent fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately measure and cut the polycarbonate sheet to the required dimensions using appropriate tools. 3. Secure the sheet using a method that allows for thermal expansion and contraction, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics. | Employ sharp, carbide-tipped blades specifically designed for cutting polycarbonate to prevent chipping and cracking. |
| Drilling holes too close to the edge. | Maintain an adequate edge distance when drilling holes, typically at least twice the hole diameter, to prevent stress concentration and potential delamination. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Shields, Impact-Resistant Glazing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||