This robust 0.390-inch thick carbon steel stock sheet offers exceptional strength and durability, making it ideal for fabricating custom components within pneumatic systems. Its precise dimensions ensure consistent results.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.390" |
| Length | 43" |
| Width | 29" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a substantial 0.390" thickness, providing superior structural integrity for heavy-duty pneumatic applications. The material's inherent strength and rigidity are crucial for components subjected to high pressures and mechanical stress. Measuring 43" in length and 29" in width, this sheet allows for efficient cutting and fabrication of manifolds, mounting brackets, and housings, ensuring precise fit and robust performance in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with pneumatic system requirements. 2. Precisely cut the sheet to the required component dimensions using appropriate tooling. 3. Ensure all fabricated components are deburred and free of sharp edges before integration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or thinner material for critical structural components. | Always select stock material with sufficient thickness and strength ratings for the intended pressure and mechanical loads. |
| Inadequate deburring of cut edges, leading to potential seal damage or component interference. | Thoroughly deburr all cut edges to ensure smooth surfaces and proper sealing. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic manifold fabrication, Heavy-duty cylinder mounts, Custom pneumatic enclosure construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||