This 0.385" thick Aluminum 6061 stock sheet, measuring 40" x 24", is engineered for robust pneumatic applications. Its superior strength-to-weight ratio and corrosion resistance make it ideal for high-pressure environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.385" |
| Length | 40" |
| Width | 24" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet offers superior mechanical integrity crucial for pneumatic system components. With a thickness of 0.385 inches, a length of 40 inches, and a width of 24 inches, it provides ample material for fabricating custom manifolds, housings, and structural supports. The inherent properties of 6061 aluminum, including its excellent weldability, machinability, and resistance to atmospheric corrosion, ensure long-term performance and reliability under varied operating conditions and pressures. This material is chosen for its balance of strength and lightweight characteristics, minimizing system weight without compromising structural integrity, a key consideration in many pneumatic designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and surface finish against design requirements. 2. Prepare edges for machining or joining according to fabrication drawings. 3. Execute machining operations with appropriate tooling and coolant for optimal chip evacuation and surface quality.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improperly setting machining parameters leading to tool wear or poor surface finish. | Consult material datasheets for recommended cutting speeds and feed rates; utilize sharp tooling and adequate lubrication. |
| Neglecting stress relief after significant machining operations, potentially leading to distortion. | Implement stress-relief annealing or controlled cooling procedures as dictated by the complexity of the machined part. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pneumatic manifold fabrication, Cylinder construction, Pneumatic control valve bodies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||