This premium brass stock sheet offers exceptional machinability and durability. With precise dimensions of 0.380" thickness, 38" length, and 24" width, it's engineered for demanding fabrication and custom projects.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.380" |
| Length | 38" |
| Width | 24" |
Specified by design engineers worldwide, this brass stock sheet (0.380" thickness x 38" length x 24" width) is manufactured to exacting tolerances, ensuring consistent performance in machining and fabrication. The inherent properties of brass, including its excellent corrosion resistance, good electrical conductivity, and appealing aesthetic, make it suitable for a wide range of industrial and decorative applications. Its substantial thickness provides structural integrity for load-bearing components and intricate designs requiring robust material.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully unpackage the brass stock sheet, ensuring no damage to the surface. 2. Measure and mark the desired cut lines using a precision marking tool. 3. Utilize appropriate sawing or cutting equipment (e.g., band saw, abrasive cut-off saw) with a suitable blade for brass, ensuring adequate cooling to prevent overheating and deformation. 4. Deburr all cut edges to ensure a smooth finish and prevent potential injury.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a blade not designed for non-ferrous metals, leading to poor cuts and excessive heat. | Employ a carbide-tipped blade specifically designed for cutting brass or other non-ferrous alloys. Ensure proper blade tooth pitch and set for clean cuts. |
| Insufficient or no coolant during sawing, causing blade binding, material warping, and premature blade wear. | Apply a dedicated cutting fluid or coolant generously to the cutting area throughout the sawing process. This lubricates the blade, dissipates heat, and improves cut quality. |
| Aggressive feeding during cutting, resulting in chipping, tearing, or blade breakage. | Feed the material at a controlled and consistent rate. Allow the saw blade to do the work, avoiding forcing the cut. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabricated parts and components, Machined fittings and connectors, Decorative architectural elements and signage.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||