This high-performance brass stock sheet is specifically engineered for demanding lubricating applications. Its robust construction and self-lubricating properties ensure smooth operation and extended component life.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.380" |
| Length | 47" |
| Width | 44" |
Built to exacting engineering tolerances, this brass stock sheet boasts a precise thickness of 0.380 inches, a substantial length of 47 inches, and a generous width of 44 inches. Manufactured from a specialized brass alloy renowned for its excellent bearing characteristics and inherent lubricity, this material minimizes friction and wear in dynamic systems. Its machinability allows for custom fabrication into bushings, bearings, thrust washers, and other critical components where low friction and resistance to seizing are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces thoroughly to remove all contaminants. 2. Accurately machine the brass stock sheet to the required dimensions for the component. 3. Install the fabricated component, ensuring proper alignment and lubrication if required by the system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly machined components. | Always ensure components are machined to the exact specifications outlined in the design drawings to prevent premature wear or failure. |
| Neglecting to clean mating surfaces before installation. | Thoroughly clean all surfaces that will come into contact with the brass component to prevent embedded debris from causing damage. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bushings, Bearing surfaces, Thrust washers, Wear plates, Self-lubricating components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||