This high-performance Nylon stock sheet, precisely manufactured to 0.379" thickness, offers superior dielectric strength and excellent abrasion resistance, ideal for demanding electrical insulation and component fabrication.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.379" |
| Length | 24" |
| Width | 38" |
Built to exacting engineering tolerances, this 0.379" thick Nylon stock sheet measures 24" in width and 38" in length, delivering exceptional dielectric strength and a high flash point crucial for electrical insulation applications. Its inherent toughness and excellent abrasion resistance ensure longevity in high-wear environments. The material's good chemical resistance further enhances its suitability for use in diverse industrial settings, providing a robust and reliable solution for custom-fabricated electrical components and protective barriers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using suitable fasteners or adhesives designed for Nylon and the intended application environment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard plastic cutters which may result in chipping or uneven edges. | Utilize sharp, high-speed cutting tools specifically designed for plastics to achieve clean, precise cuts. |
| Over-tightening fasteners, leading to stress concentration and potential cracking. | Employ washers and avoid excessive torque when fastening; consider expansion allowances for temperature variations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Electrical insulation barriers, Custom-fabricated switchgear components, Protective guards and housings in electrical equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||