This high-quality carbon steel stock sheet, specifically formulated for lubricating applications, offers exceptional wear resistance and low friction. Its precise dimensions ensure seamless integration into demanding industrial machinery.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.379" |
| Length | 24" |
| Width | 17" |
Built to exacting engineering tolerances, this 0.379-inch thick carbon steel stock sheet measures 24 inches in length and 17 inches in width. Its dense microstructure and controlled carbon content provide excellent machinability and inherent lubricity, reducing wear in moving parts. This material exhibits a Rockwell hardness range typically between HRB 80-95 (depending on specific heat treatment), ensuring durability under moderate loads and continuous operation. The surface finish is optimized to minimize friction coefficient, making it ideal for applications where smooth sliding motion is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface, ensuring it is clean, flat, and free of debris. 2. Accurately measure and cut the carbon steel sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet to the intended substrate using recommended fasteners, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or premature wear. | Thoroughly clean and degrease both the mounting surface and the steel sheet before installation. Ensure the substrate is smooth and free of imperfections. |
| Over-tightening fasteners, causing deformation of the sheet or substrate. | Use specified torque values for all fasteners. Apply even pressure across the sheet during fastening to prevent warping. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Linear bearing surfaces, Sliding wear plates, Guide rails in automated machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||