This 0.378-inch thick Nylon stock sheet is engineered for robust pneumatic systems. Its superior strength and durability make it ideal for demanding industrial environments, ensuring reliable performance and longevity.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.378" |
| Length | 40" |
| Width | 47" |
Purpose-built for heavy-duty applications, this 0.378-inch thick Nylon stock sheet offers exceptional mechanical strength, high tensile strength, and excellent abrasion resistance, crucial for high-pressure pneumatic components. Measuring 40 inches in length and 47 inches in width, its inherent toughness and impact absorption capabilities prevent premature wear and catastrophic failure in rigorous operational cycles. This material is chemically inert to many common industrial fluids, further enhancing its suitability for diverse pneumatic circuitries and components where fluid compatibility is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any debris or contaminants. 2. Position the Nylon stock sheet accurately according to design specifications. 3. Secure the sheet using appropriate fasteners or bonding agents, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate fasteners that can lead to stress concentration. | Employ fasteners designed for sheet materials, ensuring proper hole preparation and spacing to distribute load evenly. |
| Over-tightening fasteners, causing deformation or cracking of the Nylon sheet. | Use a torque wrench and follow recommended torque specifications for Nylon components to prevent over-compression. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic manifold blocks, Component mounting plates, Wear strips and guides in pneumatic cylinders.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||