This heavy-duty brass stock sheet offers exceptional strength and corrosion resistance, ideal for critical suspending and bracing applications. Its robust dimensions ensure reliable performance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.376" |
| Length | 18" |
| Width | 38" |
Specified by design engineers worldwide, this brass stock sheet is manufactured to exacting standards for critical load-bearing applications within the suspending and bracing category. Measuring a precise 0.376 inches in thickness, 18 inches in width, and 38 inches in length, this sheet leverages the inherent tensile strength, ductility, and superior corrosion resistance characteristic of high-grade brass alloys. These properties make it an optimal choice for applications requiring long-term structural integrity and resistance to environmental degradation, including custom support structures, heavy-duty mounting plates, and specialized bracing systems in corrosive atmospheres.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately mark and drill mounting holes according to design specifications, utilizing appropriate drill bits for brass. 3. Securely fasten the brass sheet using corrosion-resistant hardware, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that do not adequately distribute load. | Always use fasteners of sufficient diameter and strength to match the load requirements and the thickness of the brass sheet, ensuring proper load transfer. |
| Over-tightening fasteners, leading to potential deformation or cracking of the brass sheet. | Tighten fasteners to the manufacturer's recommended torque specifications for brass, utilizing a torque wrench if necessary to prevent damage. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom structural supports, Heavy-duty bracing systems, Corrosion-resistant mounting plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||