This high-quality, 0.374" thick Nylon stock sheet is engineered for superior lubricating performance. Its robust material properties ensure excellent wear resistance and low friction in demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.374" |
| Length | 15" |
| Width | 36" |
Built to exacting engineering tolerances, this 0.374" thick Nylon stock sheet measures 15" in width and 36" in length. Fabricated from high-density, self-lubricating Nylon, it exhibits a low coefficient of friction, exceptional wear resistance, and good impact strength. This material is ideal for applications requiring reduced noise and vibration, such as slide components, wear pads, and bearing surfaces. Its inherent lubricity minimizes the need for external greasing, extending component life and reducing maintenance cycles.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut Nylon component to the intended assembly using standard industrial fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard Nylon where self-lubricating properties are critical. | Specify and utilize lubricating grade Nylon stock sheets for applications requiring reduced friction and wear, such as sliding mechanisms or bearing surfaces. |
| Improper cutting techniques leading to material stress or chipping. | Employ sharp, specialized cutting tools designed for plastics and utilize appropriate feed rates and speeds to achieve clean cuts without damaging the Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and guides, Slide components, Low-friction bearings, Gears and sprockets, Bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||