This heavy-gauge carbon steel stock sheet offers exceptional rigidity and dimensional stability for precision measurement, inspection, and fabrication tasks in industrial environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.374" |
| Length | 18" |
| Width | 21" |
Built to exacting engineering tolerances, this carbon steel stock sheet measures 0.374 inches in thickness, 18 inches in width, and 21 inches in length. The material's inherent strength and low thermal expansion coefficient make it ideal for applications requiring high dimensional accuracy and resistance to deformation under load. Its robust nature ensures longevity in environments subject to heavy use and potential impact, making it a reliable substrate for precision jigs, fixtures, and inspection surfaces.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface where the sheet will be placed is clean, level, and free of debris. 2. Carefully position the carbon steel stock sheet in its intended location. 3. Secure the sheet using appropriate fastening methods for the application, ensuring minimal distortion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a non-level surface for installation. | Always install on a verified level surface to maintain the sheet's dimensional integrity and accuracy. |
| Over-tightening fasteners, causing localized stress and warping. | Apply fasteners with consistent torque, avoiding over-tightening to prevent deformation of the sheet. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Precision measurement and inspection surfaces, Substrate for jigs and fixtures, Heavy-duty fabrication and tooling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||