This premium brass stock sheet is engineered for superior lubricating properties. Its dense microstructure and inherent lubricity make it ideal for demanding applications requiring reduced friction and enhanced wear resistance in critical components.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.373" |
| Length | 17" |
| Width | 36" |
Precision-manufactured to tight tolerances, this 0.373" thick brass stock sheet offers exceptional dimensional stability and surface finish. Composed of a high-copper alloy with controlled additions for optimal machinability and anti-friction characteristics, it exhibits excellent thermal conductivity and corrosion resistance. The material's self-lubricating nature minimizes wear when in contact with moving parts, making it suitable for bearings, bushings, slide plates, and wear pads in industrial machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove any debris or contaminants. 2. Carefully position the brass stock sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods (e.g., adhesive bonding, mechanical fasteners) ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to adhesion failure. | Ensure all surfaces are scrupulously cleaned and degreased before installation. |
| Over-tightening fasteners, causing deformation or stress concentration. | Utilize torque specifications provided in the equipment's manual and apply fasteners evenly. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing Surfaces, Wear Plates, Bushings and Sleeve Bearings, Slide Components, Anti-Friction Elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||