This premium brass stock sheet offers exceptional durability and corrosion resistance. Precisely manufactured to 0.371" thickness, 17" length, and 16" width, it's engineered for demanding material handling environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.371" |
| Length | 17" |
| Width | 16" |
Manufactured under strict quality controls, this brass stock sheet features a nominal thickness of 0.371 inches, with precise length and width dimensions of 17 inches and 16 inches respectively. Composed of a high-copper alloy, it exhibits excellent machinability, weldability, and inherent corrosion resistance, making it suitable for applications requiring conductivity and structural integrity. The material's density and tensile strength are optimized for load-bearing components in material handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean, dry, and free of debris. 2. Carefully position the brass sheet, aligning it with pre-drilled holes or mounting points. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to prevent warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners. | Utilize fasteners that are adequately sized for the 0.371" thickness to ensure secure attachment. |
| Over-tightening fasteners. | Apply torque carefully to avoid deforming or damaging the brass sheet. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom material handling trays, Support plates for industrial equipment, Corrosion-resistant structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||