This robust Nylon stock sheet offers exceptional durability and low friction for demanding material handling. Its precise dimensions and superior material properties ensure reliable performance in challenging industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.368" |
| Length | 25" |
| Width | 24" |
Built to exacting engineering tolerances, this Nylon stock sheet measures 0.368 inches in thickness, 25 inches in length, and 24 inches in width. Composed of high-performance Nylon 6/6, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, making it ideal for wear strips, chute liners, and impact pads in conveyor systems and general material handling equipment. Its chemical resistance also ensures longevity in varied operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely mark and pre-drill mounting holes as required by the application. 3. Securely fasten the Nylon stock sheet using appropriate hardware, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to poor adhesion or uneven wear. | Thoroughly clean and prepare the mounting surface to ensure optimal contact and longevity. |
| Over-tightening fasteners, which can cause stress concentrations and cracking in the Nylon. | Use appropriate torque settings and consider using washers to distribute pressure evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Chute and Hopper Liners, Impact Plates and Bumpers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||