This high-grade carbon steel stock sheet is engineered for demanding pneumatic applications. Its substantial thickness and precise dimensions provide a foundational element for robust system fabrication and long-term operational integrity.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.368" |
| Length | 29" |
| Width | 20" |
A high-performance industrial component, this carbon steel stock sheet is precisely manufactured to meet the rigorous demands of pneumatic systems. With a nominal thickness of 0.368 inches, a length of 29 inches, and a width of 20 inches, it offers substantial material for fabricating structural components, housings, and mounting plates. The inherent strength and durability of carbon steel ensure resistance to mechanical stress and vibration, critical for maintaining the integrity and efficiency of pneumatic circuits. This material's weldability and machinability further facilitate its integration into custom designs and complex assemblies within industrial automation and fluid power applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Prepare surfaces for cutting, bending, or welding according to fabrication drawings. 3. Securely fasten or integrate the prepared sheet into the pneumatic system assembly, ensuring proper alignment and stress distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, leading to burrs and compromised edge integrity. | Employ high-quality cutting tools specifically designed for steel plate to ensure clean cuts and smooth edges. |
| Improper welding procedures resulting in stress concentrations or porosity. | Follow established welding standards for carbon steel, ensuring proper joint preparation, filler material selection, and controlled heat input. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder fabrication, Control manifold bases, Enclosures for pneumatic components, Mounting brackets and supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||