This 0.367" thick Nylon stock sheet provides superior durability and performance for demanding pneumatic systems. Its robust material properties ensure longevity and reliable operation.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.367" |
| Length | 41" |
| Width | 23" |
Built to exacting engineering tolerances, this 0.367" thick Nylon stock sheet offers a substantial 41" length and 23" width, ideal for custom fabrication in pneumatic applications. Nylon's inherent properties, including excellent tensile strength, high abrasion resistance, and good chemical resistance to oils and solvents commonly found in pneumatic environments, make it a superior choice. Its low coefficient of friction facilitates smooth operation of moving parts. This material is readily machinable, allowing for precise component creation and integration into complex pneumatic assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting area is clean and free of debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Smooth all cut edges to prevent stress concentrations and facilitate proper assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or incorrect cutting tools, leading to poor edge quality and potential material stress. | Utilize sharp, high-quality cutting tools specifically designed for plastics and ensure correct feed rates and speeds to maintain material integrity. |
| Overheating the material during machining, causing melting and deformation. | Employ adequate cooling methods, such as air jets or coolant, and maintain appropriate machining parameters to prevent thermal damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pneumatic cylinder components, Wear strips and guides for pneumatic actuators, Seals and gaskets for pneumatic fittings, Bushings and bearings for pneumatic machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||