This robust carbon steel stock sheet provides exceptional durability and load-bearing capacity. Its substantial thickness and precise dimensions make it ideal for fabricating heavy-duty material handling equipment and structural components.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.362" |
| Length | 38" |
| Width | 39" |
Built to exacting engineering tolerances, this 0.362-inch thick carbon steel sheet boasts a nominal yield strength of 36,000 psi, ensuring superior structural integrity under significant stress. Measuring 38 inches in length and 39 inches in width, this material is manufactured to ASTM A36 standards, guaranteeing consistent chemical composition and mechanical properties essential for reliable performance in fabrication and construction. Its dense, non-porous surface resists wear and impact, making it suitable for demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper lifting and handling equipment is utilized due to the sheet's weight. 2. Verify the intended application's structural requirements align with the sheet's specifications. 3. Follow industry-standard welding, cutting, and fastening procedures for carbon steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or lower-grade steel for heavy loads. | Always confirm the material's specifications meet or exceed the calculated load requirements for the intended application. |
| Inadequate surface preparation before welding or coating. | Thoroughly clean the steel surface of rust, mill scale, and contaminants to ensure optimal adhesion and weld quality. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Fabrication of industrial shelving and racking systems, Construction of heavy-duty pallets and skids, Manufacturing of custom material handling equipment (e.g., chutes, hoppers).
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||