This high-quality lubricating brass stock sheet, at 0.362" thickness, is specifically engineered for applications requiring low friction and wear resistance. Its material composition ensures excellent machinability and long service life.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.362" |
| Length | 40" |
| Width | 26" |
Built to exacting engineering tolerances, this brass stock sheet features a precise thickness of 0.362 inches, a length of 40 inches, and a width of 26 inches. Composed of a specific brass alloy formulated for superior self-lubricating properties, it exhibits excellent thermal conductivity and corrosion resistance, making it ideal for sliding components, bearings, and wear plates where reduced friction is critical for operational efficiency and extended component lifespan. The material's inherent ductility allows for easy fabrication and forming.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, smooth, and free of debris. 2. Accurately cut the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the cut sheet to the intended component, ensuring proper alignment to prevent binding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-wear, low-friction applications. | Select specialized lubricating brass alloys, like this stock sheet, engineered for reduced friction and wear. |
| Improperly toleranced cuts leading to binding. | Utilize precision cutting methods and verify dimensions against the design specifications before installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bearings and bushings, Wear plates and guides, Sliding mechanisms and linkages.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||