This high-grade carbon steel stock sheet is engineered for demanding lubricating applications. Its robust 0.356" thickness and precise dimensions ensure exceptional performance and longevity in industrial environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.356" |
| Length | 25" |
| Width | 20" |
Purpose-built for heavy-duty applications, this carbon steel stock sheet offers superior durability and wear resistance. With a thickness of 0.356 inches, a length of 25 inches, and a width of 20 inches, it provides ample material for a variety of fabrication needs. The inherent strength and machinability of carbon steel make it ideal for components within lubrication systems, such as bearing housings, wear plates, and fluid containment structures, where resistance to friction and moderate corrosion is critical. Its consistent material properties ensure reliable performance under demanding operational stresses.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface thoroughly to remove any debris or contaminants. 2. Accurately cut the stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut section into its intended application, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools that can lead to burrs or uneven edges. | Utilize high-quality cutting tools such as abrasive saws, plasma cutters, or waterjet cutters specifically designed for metal fabrication to ensure clean, precise cuts. |
| Inadequate surface preparation before installation, leading to poor adhesion or premature wear. | Thoroughly degrease and, if necessary, lightly abrade the mating surfaces of both the carbon steel sheet and the application component to promote optimal contact and durability. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Bearing support structures, Wear plates in conveyor systems, Lubricant reservoirs and splash guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||