This robust Nylon stock sheet offers exceptional durability and precision for a wide range of industrial applications. Its superior material properties ensure reliable performance in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.339" |
| Length | 23" |
| Width | 22" |
Engineered for reliability and performance, this 0.339" thick Nylon stock sheet provides a substantial material solution for critical components. Manufactured from high-grade nylon, it exhibits excellent tensile strength, impact resistance, and a low coefficient of friction, making it ideal for wear surfaces, bushings, and structural elements. The sheet's generous dimensions of 23" x 22" offer ample material for custom fabrication and large-scale production runs, ensuring minimal waste and cost-effectiveness.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the substrate thoroughly to remove any debris or contaminants. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Secure the Nylon component using suitable fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymers, leading to melting or uneven edges. | Employ specialized plastic cutting tools with sharp blades and appropriate feed rates to achieve clean, precise cuts without heat buildup. |
| Over-tightening fasteners, which can cause stress concentrations and crack the nylon. | Utilize torque-limiting tools and consider using washers to distribute pressure evenly when securing nylon components. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Gears and sprockets, Chute liners, Protective guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||