This 0.328-inch thick polycarbonate sheet offers superior impact resistance and clarity. Its robust nature makes it ideal for demanding material handling solutions and protective barriers.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.328" |
| Length | 19" |
| Width | 17" |
Specified by design engineers worldwide, this 0.328" thick polycarbonate sheet, measuring 19" x 17", provides exceptional impact strength and excellent optical clarity. Engineered for durability, it exhibits a high tensile strength and a broad operating temperature range, ensuring reliable performance in harsh industrial environments. Its inherent toughness minimizes the risk of shattering or cracking, making it a preferred material for protective guards, machine enclosures, and transparent shelving in material handling systems. The sheet's dimensional stability further enhances its suitability for precision applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Carefully position the polycarbonate sheet, aligning mounting holes if applicable. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without rubber washers, leading to point stress and potential cracking. | Always use rubber or neoprene washers with fasteners to distribute load evenly and prevent stress concentration on the polycarbonate surface. |
| Drilling mounting holes too close to the edge, compromising structural integrity. | Maintain a minimum edge distance for drilled holes, typically at least twice the hole diameter, to prevent tearing or delamination. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding and enclosures, Transparent shelving and dividers, Protective barriers and shields.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||