Engineered for demanding industrial environments, this 0.327" thick Polycarbonate stock sheet offers exceptional impact resistance and a naturally low coefficient of friction, ideal for sliding and wear-resistant components.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.327" |
| Length | 29" |
| Width | 22" |
Specified by design engineers worldwide, this 0.327" thick polycarbonate sheet (29" x 22") provides a robust and dimensionally stable material solution for lubricating applications. Its inherent low friction properties, combined with excellent impact strength and clarity, make it suitable for guides, chutes, wear strips, and low-load bearing surfaces where reduced friction and abrasion resistance are critical. The material's rigidity and ease of machining allow for precise component fabrication in diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Cut the polycarbonate sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard polycarbonate where high-temperature resistance is required. | Select a polycarbonate grade specifically formulated for high-temperature applications or consider alternative materials like PEEK. |
| Over-tightening fasteners, leading to stress cracking. | Utilize appropriate spacing and torque settings for fasteners, and consider using washers to distribute load. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction wear strips, Slide guides and chutes, Bearing surfaces for light loads.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||