This premium carbon steel stock sheet, measuring 0.325" x 20" x 32", is engineered for high-strength suspending and bracing applications. Its robust construction ensures exceptional load-bearing capacity and long-term structural integrity.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.325" |
| Length | 20" |
| Width | 32" |
Built to exacting engineering tolerances, this 0.325" thick carbon steel stock sheet offers superior mechanical properties ideal for demanding structural support. Its yield strength and tensile strength make it suitable for critical bracing and suspension systems where rigidity and load distribution are paramount. The precise dimensions of 20" x 32" ensure consistent fitment in engineered frameworks, minimizing secondary operations and promoting efficient assembly in industrial construction, HVAC installations, and heavy machinery support.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and capable of supporting the intended load. 2. Accurately mark and pre-drill holes in the carbon steel sheet according to your structural design. 3. Securely fasten the sheet to the mounting surface using appropriate grade-rated fasteners and bracing hardware.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners. | Always use fasteners that are rated for the shear and tensile loads of the application, and are compatible with carbon steel. |
| Inadequate load distribution across the sheet. | Ensure the sheet is adequately supported and braced to prevent localized stress concentrations, which can lead to premature failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Structural bracing in commercial buildings, Support for HVAC ductwork and piping, Mounting plates for industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||