This robust carbon steel stock sheet is engineered for demanding pneumatic applications. Its substantial thickness and durable material composition ensure reliable performance and longevity in high-stress environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.322" |
| Length | 41" |
| Width | 23" |
Purpose-built for heavy-duty applications, this carbon steel stock sheet measures 0.322 inches in thickness, with dimensions of 41 inches in length and 23 inches in width. Its inherent strength and high tensile properties make it ideal for constructing robust pneumatic system components, including housings, mounting brackets, and structural supports that require exceptional load-bearing capacity and resistance to deformation. The material's machinability allows for precise fabrication to meet stringent engineering tolerances.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity before fabrication. 2. Fabricate to precise engineering drawings, ensuring smooth edges and accurate hole placement. 3. Integrate securely into the pneumatic system, following design specifications for load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for high-pressure pneumatic applications. | Always select stock sheets with sufficient thickness and material strength to withstand the intended operating pressures and mechanical stresses. |
| Inadequate edge finishing leading to stress concentrations. | Ensure all cut edges are properly deburred and smoothed to prevent premature failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder construction, High-pressure valve manifolds, Industrial automation framework components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||