This robust 0.320-inch thick Nylon stock sheet offers exceptional durability and wear resistance. Its generous 32-inch by 19-inch dimensions make it suitable for fabricating custom components in challenging industrial settings.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.320" |
| Length | 32" |
| Width | 19" |
Designed for demanding industrial environments, this Nylon stock sheet provides superior impact strength, excellent abrasion resistance, and good chemical inertness. Its dense polymer structure effectively dampens vibration and reduces noise. The 0.320" thickness ensures substantial structural integrity for applications requiring load-bearing capabilities and protection against wear. Ideal for fabricating wear strips, chute liners, custom brackets, and impact pads in material handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare the mounting surface thoroughly. 2. Precisely mark and drill mounting holes according to design specifications. 3. Securely fasten the Nylon stock sheet using appropriate hardware, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper hardware selection leading to premature wear or detachment. | Utilize hardware with appropriate thread engagement and corrosion resistance for the operating environment. Consider using washers to distribute load. |
| Cutting or machining without adequate cooling, causing material degradation. | Employ cutting fluids or air cooling during machining operations to prevent excessive heat buildup and maintain material integrity. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Chute Liners, Impact Plates, Custom Brackets and Mounts, Gears and Bushings (low load).
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||