This 0.320" thick carbon steel stock sheet is engineered for demanding pneumatic applications. Its substantial gauge provides superior structural integrity for robust system components.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.320" |
| Length | 32" |
| Width | 27" |
Purpose-built for heavy-duty applications, this 0.320" thick carbon steel stock sheet offers exceptional strength and durability. Measuring 32" in length and 27" in width, it provides ample material for fabricating robust pneumatic enclosures, support structures, and high-pressure components. The inherent properties of carbon steel ensure resistance to impact and wear, making it ideal for environments subjected to vibration or significant mechanical stress. This material's machinability and weldability further enhance its suitability for custom pneumatic system designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut stock sheet to required dimensions using appropriate metal cutting tools. 2. Fabricate components according to pneumatic system design specifications, ensuring precise tolerances. 3. Weld or fasten fabricated components securely, adhering to industry welding standards for carbon steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material than specified for high-pressure pneumatic systems. | Always verify the required material thickness based on system pressure ratings and application demands to prevent structural failure. |
| Inadequate surface preparation before welding, leading to weak joints. | Thoroughly clean the welding area to remove rust, oil, or paint to ensure optimal weld penetration and strength. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty pneumatic cylinder construction, Industrial compressor housing fabrication, Pneumatic manifold mounting plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||