High-quality carbon steel stock sheet, specifically engineered for lubricating applications. Its robust construction and precise dimensions ensure reliable performance in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.313" |
| Length | 18" |
| Width | 41" |
Manufactured under strict quality controls, this carbon steel stock sheet is specified at 0.313 inches in thickness, with a generous length of 18 inches and a width of 41 inches. Its carbon steel composition offers excellent tensile strength, hardness, and wear resistance, crucial for applications where controlled friction and reduced wear are paramount. The material is selected for its ability to integrate with lubrication systems, ensuring smooth operation and extended component life in machinery and tooling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free from debris. 2. Apply appropriate lubricant to the carbon steel sheet and the mating component. 3. Securely fasten the sheet according to the equipment's design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Insufficient lubrication during initial setup. | Apply a liberal amount of the recommended lubricant to both the carbon steel sheet and the mating surface before assembly and during initial operation. |
| Using the sheet in an environment exceeding its intended lubrication parameters. | Verify that the operating environment (temperature, pressure, presence of abrasive contaminants) is within the design limits for this lubricating grade carbon steel. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Wear strips in conveyor systems, Guide rails for sliding mechanisms, Low-friction components in tooling and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||