High-performance Nylon stock sheet engineered for lubricated applications. Its inherent self-lubricating properties reduce friction and wear, making it ideal for demanding mechanical components.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.308" |
| Length | 24" |
| Width | 27" |
Built to exacting engineering tolerances, this Nylon stock sheet offers superior dimensional stability and consistent performance. The 0.308" thickness, combined with a 24" length and 27" width, provides ample material for custom fabrication. Its self-lubricating grade Nylon composition exhibits excellent wear resistance, a low coefficient of friction, and good chemical resistance, making it suitable for applications requiring reduced operational friction and extended component life in environments like bearings, bushings, and wear pads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and free of debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Smooth all cut edges to prevent stress concentration and ensure a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard Nylon for high-friction applications | Select the self-lubricating grade Nylon stock sheet for optimal performance in wear-intensive and high-friction scenarios. |
| Ignoring edge finishing after cutting | Always deburr and chamfer cut edges to improve stress distribution and prevent premature failure. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Self-lubricating bearings, Wear strips and guides, Bushings and sleeves, Chute liners, Conveyor components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||