This premium brass stock sheet, measuring 0.308" thick by 13" x 33", offers exceptional machinability and corrosion resistance, making it a superior choice for demanding pneumatic applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.308" |
| Length | 13" |
| Width | 33" |
Trusted by engineers across multiple sectors, this brass stock sheet is manufactured to exacting standards for critical pneumatic component fabrication. Its 0.308" (approx. 7.82mm) thickness provides robust structural integrity, while the imperial dimensions of 13" (approx. 330.2mm) length and 33" (approx. 838.2mm) width ensure ample material for a variety of parts. Composed primarily of copper and zinc, brass exhibits excellent formability, good conductivity, and inherent resistance to atmospheric corrosion, crucial for pneumatic environments where moisture and various media are present. The alloy's machinability allows for intricate part design and precise tolerances.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the brass stock sheet to the required dimensions using appropriate metal cutting tools. 2. Machine the sheet to fabricate the specific pneumatic component, adhering to design tolerances. 3. Deburr all edges thoroughly to prevent material debris from entering the pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient thickness for high-pressure pneumatic lines. | Always verify the required material thickness based on system pressure ratings and relevant pneumatic standards. |
| Allowing burrs or sharp edges on fabricated parts. | Implement a rigorous deburring process after all machining operations to ensure system integrity and safety. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pneumatic Manifolds, Valve Bodies, Cylinder Components, Fittings and Connectors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||