This high-quality carbon steel stock sheet, precisely manufactured to 0.301" thickness, 45" length, and 29" width, is engineered for robust fabricating applications requiring superior strength and durability.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.301" |
| Length | 45" |
| Width | 29" |
Built to exacting engineering tolerances, this 0.301-inch thick carbon steel stock sheet offers exceptional material integrity. The dimensions of 45 inches in length and 29 inches in width provide a versatile raw material for a wide range of fabrication projects. Its inherent tensile strength and ductility make it ideal for applications involving forming, cutting, welding, and structural assembly. This grade of carbon steel is known for its reliable performance under stress and its ease of machining, ensuring consistent results in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface quality against project requirements. 2. Prepare edges for cutting or joining using appropriate tooling. 3. Implement designated welding or fastening procedures according to fabrication drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding procedures for the carbon steel grade, leading to brittle welds. | Consult material data sheets and utilize recommended pre-heating and post-weld heat treatment procedures for this specific carbon steel. |
| Inadequate edge preparation before cutting, resulting in rough or inaccurate cuts. | Ensure cutting tools are sharp and the correct feed rate is used for the 0.301" thickness to achieve clean, precise edges. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Structural components, Machine bases and frames, Heavy equipment fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||