This robust carbon steel stock sheet is engineered for demanding pneumatic applications. Its substantial thickness and durable material composition ensure reliable performance and longevity in industrial settings.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.301" |
| Length | 34" |
| Width | 19" |
A proven choice for industrial professionals, this carbon steel stock sheet offers exceptional durability and tensile strength, ideal for fabricating components within pneumatic systems. Measuring 0.301 inches thick, 34 inches in length, and 19 inches in width, it provides ample material for creating robust housings, structural supports, and pressure-bearing elements. The inherent rigidity of carbon steel ensures dimensional stability under significant operational pressures, minimizing the risk of deformation or failure in critical pneumatic infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of any contaminants. 2. Accurately cut the sheet to the required dimensions for the pneumatic component. 3. Fabricate and assemble according to engineering drawings and relevant safety standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade steel that may not withstand pneumatic pressures. | Always verify material specifications meet or exceed the requirements of the pneumatic system's operating pressure and temperature. |
| Improper edge preparation leading to stress concentrations. | Ensure all cut edges are deburred and, if necessary, chamfered to prevent premature fatigue failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder fabrication, Air reservoir construction, Control valve housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||