This robust brass stock sheet, measuring 0.294" thick, 35" long, and 30" wide, provides exceptional strength and corrosion resistance for critical suspending and bracing applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.294" |
| Length | 35" |
| Width | 30" |
Precision-manufactured to tight tolerances, this brass stock sheet offers a substantial 0.294" thickness, ensuring superior load-bearing capacity and structural integrity. Composed of a high-copper alloy, it exhibits excellent electrical and thermal conductivity, along with inherent resistance to corrosion and tarnishing, making it ideal for environments where durability and longevity are paramount. The generous 35" x 30" dimensions allow for versatile fabrication and customization in complex structural assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut brass sheet to required dimensions using appropriate metal cutting tools. 2. Drill mounting holes as per design specifications, ensuring proper spacing for load distribution. 3. Securely fasten the brass sheet to the supporting structure using corrosion-resistant fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that cannot adequately support the intended load. | Select fasteners with a tensile strength and diameter appropriate for the calculated loads and the thickness of the brass sheet. |
| Insufficient edge support leading to potential bending or deformation under stress. | Ensure adequate bracing and support along all edges of the brass sheet, especially in high-stress areas. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty structural bracing in corrosive environments, Custom mounting plates for electrical or mechanical equipment, Support frames for industrial piping and conduits.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||