This 0.289" thick carbon steel stock sheet is engineered for demanding electrical and lighting applications. Its robust nature ensures long-lasting performance and reliable structural integrity in diverse environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.289" |
| Length | 23" |
| Width | 28" |
Built to exacting engineering tolerances, this carbon steel sheet boasts a precise thickness of 0.289 inches, a length of 23 inches, and a width of 28 inches. The material's inherent strength and magnetic properties make it ideal for fabricating electrical enclosures, control panels, and support structures for lighting systems. Its consistent gauge and flat surface minimize machining requirements and ensure uniform heat dissipation where critical. Compliance with relevant material standards guarantees predictable mechanical behavior and durability in industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris before fabrication. 2. Precisely cut to desired dimensions using appropriate metalworking tools. 3. Weld, rivet, or fasten according to enclosure or fixture design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard mild steel for high-stress electrical components. | Specify carbon steel for its superior tensile strength and durability in critical applications. |
| Ignoring material thickness variations during enclosure design. | Utilize sheets with exact engineering tolerances to ensure consistent component fit and structural integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Electrical Enclosures & Cabinets, Lighting Fixture Housings, Control Panel Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||