This 0.285" thick Nylon stock sheet is engineered for demanding industrial environments. Its robust composition ensures exceptional durability, high load-bearing capacity, and superior wear resistance for critical fabricated components.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.285" |
| Length | 39" |
| Width | 20" |
Purpose-built for heavy-duty applications, this 0.285" thick Nylon stock sheet offers an optimal balance of strength, toughness, and low friction. Measuring 20" in width and 39" in length, it's ideal for machining custom gears, wear pads, and structural components that require resistance to abrasion, impact, and chemicals. The material's inherent self-lubricating properties minimize wear and extend the service life of dynamic parts, making it a preferred choice for demanding mechanical assemblies and high-stress environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Machine or form the cut material to achieve the final component geometry, adhering to design tolerances. 3. Install the fabricated Nylon part into its intended application, ensuring proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or poor edge quality. | Utilize sharp, carbide-tipped cutting tools specifically designed for machining Nylon to ensure clean cuts and prevent overheating. |
| Ignoring thermal expansion during machining, resulting in dimensional inaccuracies after cooling. | Account for Nylon's thermal expansion by employing appropriate cooling methods during machining and allowing the material to stabilize to ambient temperature before final measurements. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Gears and Sprockets, Wear Strips and Bushings, Impact-Resistant Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||