This high-quality carbon steel stock sheet, measuring 0.285 inches thick, 43 inches long, and 23 inches wide, is engineered for demanding pneumatic system components requiring robust structural integrity and reliable performance.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.285" |
| Length | 43" |
| Width | 23" |
Manufactured under strict quality controls, this 0.285" thick carbon steel stock sheet offers exceptional tensile strength and durability, making it ideal for fabricating robust pneumatic components such as valve bodies, cylinders, and mounting brackets. Its precise dimensions (43" length x 23" width) ensure consistent material for mass production and custom fabrication. The material's inherent toughness and machinability allow for intricate designs and reliable performance in high-pressure pneumatic environments. It resists deformation and wear, contributing to the longevity and efficiency of pneumatic machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and precisely cut the carbon steel sheet to the required dimensions for your pneumatic component. 2. Prepare the cut edges through deburring and any necessary finishing processes. 3. Fabricate the component according to design specifications, utilizing appropriate welding, machining, or forming techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or incorrectly specified steel for structural integrity. | Always verify material specifications and thickness against the design requirements for the pneumatic application to ensure adequate strength and load-bearing capacity. |
| Improper edge preparation leading to welding or machining difficulties. | Thoroughly deburr all cut edges and ensure a clean surface finish to facilitate accurate fabrication and prevent stress risers. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder construction, Valve body fabrication, Mounting plates and brackets for pneumatic equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||