This robust Nylon stock sheet offers exceptional wear resistance and impact strength, ideal for manufacturing custom components and replacement parts in harsh industrial settings. Its precise dimensions ensure reliable performance.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.284" |
| Length | 30" |
| Width | 16" |
Designed for demanding industrial environments, this Nylon stock sheet features a precise thickness of 0.284 inches, a length of 30 inches, and a width of 16 inches. Fabricated from high-performance nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, making it suitable for applications such as wear pads, bushings, guide rails, and custom fabricated parts requiring dimensional stability under load and resistance to chemicals.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired cut lines on the Nylon stock sheet. 2. Utilize a suitable saw blade (e.g., fine-tooth carbide) and appropriate cutting speed to avoid excessive heat buildup and melting. 3. Smooth any rough edges with sandpaper or a deburring tool for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an incorrect saw blade or excessive speed, leading to melting or chipping. | Employ a fine-tooth blade designed for plastics and maintain a moderate cutting speed. Consider using a coolant if prolonged cutting is required. |
| Failure to account for thermal expansion during fabrication. | Allow for slight expansion and contraction by not over-tightening fasteners and providing adequate clearance where necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear components, Bushings and bearings, Protective liners and guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||