This high-purity brass stock sheet, engineered to precise dimensions, offers exceptional electrical conductivity and corrosion resistance, making it ideal for demanding electrical and lighting components.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.281" |
| Length | 16" |
| Width | 30" |
Specified by design engineers worldwide, this brass stock sheet is manufactured to rigorous standards, ensuring exceptional performance in electrical and lighting applications. With a precise thickness of 0.281 inches, and dimensions of 16 inches by 30 inches, it provides a stable and reliable substrate for various conductive components. The inherent properties of brass, including excellent solderability, machinability, and resistance to environmental degradation, contribute to the longevity and efficiency of finished products.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass sheet surface is clean and free of contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate metalworking tools. 3. Securely fasten the cut brass components using approved conductive fasteners or soldering techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs and uneven edges. | Employ sharp, specialized metal cutting tools designed for brass to ensure clean, precise edges. |
| Inadequate surface preparation before soldering or fastening. | Thoroughly clean and abrade the brass surface with fine-grit sandpaper or a wire brush to promote optimal adhesion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical Busbars, Lighting Fixture Components, Electrical Connector Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||