This robust 0.280-inch thick Nylon stock sheet is engineered for exceptional performance in abrading and polishing tasks. Its superior material properties ensure durability and precision for industrial use.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.280" |
| Length | 12" |
| Width | 18" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a precise thickness of 0.280 inches, a standard length of 12 inches, and a width of 18 inches. Composed of high-grade Nylon, it exhibits excellent wear resistance, low friction coefficient, and good impact strength, making it ideal for demanding abrasive and polishing operations where surface finish and longevity are critical. Its inherent toughness allows for effective material removal and surface refinement across various substrates.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface to be worked on is clean and free of debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for plastics. 3. Securely fasten the sheet to the polishing or abrading equipment, ensuring proper alignment and contact pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive heat during cutting, leading to material deformation or melting. | Employ cutting tools designed for plastics, such as carbide-tipped blades, and maintain moderate cutting speeds to dissipate heat effectively. |
| Incorrect mounting pressure, causing uneven wear or ineffective polishing. | Calibrate mounting pressure according to the specific application and substrate, ensuring consistent contact across the entire sheet surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Precision surface finishing of metals and plastics, Deburring and edge radiusing of components, Preparation of surfaces for coating and plating.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||