This high-quality brass stock sheet, specifically formulated for lubricating applications, offers exceptional wear resistance and a low coefficient of friction. Its robust composition ensures reliable performance in demanding environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.276" |
| Length | 40" |
| Width | 38" |
Engineered for reliability and performance, this brass stock sheet features a precise thickness of 0.276 inches, a length of 40 inches, and a width of 38 inches. Its specific alloy composition provides inherent lubricity and excellent machinability, making it ideal for fabrication of bearings, bushings, and wear plates. The material exhibits superior resistance to galling and seizing under moderate loads and speeds, ensuring extended service life in critical mechanical components. Rigorous quality control ensures dimensional accuracy and material integrity for consistent operational results.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely cut or machine the brass sheet to the required dimensions for your component. 3. Securely install the fabricated part using appropriate fasteners or press-fitting techniques as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys for high-friction applications. | Always select a brass alloy specifically designed for lubricating or bearing applications to ensure proper wear and friction characteristics. |
| Inadequate surface preparation of mating components. | Thoroughly clean and deburr all mating surfaces before installation to prevent premature wear and ensure smooth operation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bushings and Bearings, Wear Plates, Slide Components, Low-Friction Bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||