This premium brass stock sheet, specifically engineered for lubricating applications, provides superior wear resistance and inherent self-lubricating properties. Its robust nature ensures longevity and optimal performance in demanding operational settings.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.267" |
| Length | 16" |
| Width | 47" |
Precision-manufactured to tight tolerances, this brass stock sheet boasts a thickness of 0.267 inches, a length of 16 inches, and a width of 47 inches. Composed of a high-grade brass alloy, it exhibits excellent machinability, corrosion resistance, and a low coefficient of friction, making it inherently suitable for applications requiring reduced wear and smooth operation. This material's composition ensures consistent performance under various load and speed conditions, vital for sliding components, bearings, and wear pads in industrial machinery. Its dimensional stability further guarantees reliable integration into complex assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the brass stock sheet according to design specifications. 3. Securely fasten the sheet using appropriate mechanical fasteners, avoiding over-tightening to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that can cause galvanic corrosion with brass. | Utilize stainless steel or brass fasteners to prevent galvanic corrosion and ensure material compatibility. |
| Improper surface preparation leading to poor adhesion or uneven wear. | Thoroughly clean and deburr both the mounting surface and the brass sheet edges before installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Journal bearings and bushings, Wear plates and guide strips, Slide mechanisms in automated equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||