This 0.261-inch thick 304 stainless steel stock sheet provides exceptional durability and corrosion resistance for demanding material handling environments. Its robust composition ensures longevity and performance in various industrial settings.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.261" |
| Length | 25" |
| Width | 18" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet offers superior strength and corrosion resistance. With a precise thickness of 0.261 inches, a length of 25 inches, and a width of 18 inches, it meets stringent material handling requirements. The inherent properties of 304 stainless steel, including its excellent weldability and formability, make it suitable for fabricating custom components, chutes, hoppers, and structural supports in food processing, chemical, and general industrial applications where hygiene and resistance to a wide range of corrosive agents are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of contaminants. 2. Carefully position the sheet for cutting, bending, or welding according to design specifications. 3. Utilize appropriate safety equipment, including gloves and eye protection, during all fabrication steps.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for stainless steel, leading to poor edge quality and excessive heat. | Employ specialized tooling and lubricants designed for stainless steel cutting to maintain edge integrity and prevent thermal damage. |
| Inadequate cleaning after fabrication, leaving behind residues that can initiate corrosion. | Thoroughly degrease and clean all surfaces after fabrication, using non-abrasive materials and appropriate cleaning agents for stainless steel. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of material handling equipment, Chute and hopper liners, Protective barriers and guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||