This 0.257-inch thick brass stock sheet provides exceptional durability and conductivity. Measuring 42 by 42 inches, it's engineered for reliable performance in rigorous industrial settings.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.257" |
| Length | 42" |
| Width | 42" |
Designed for demanding industrial environments, this brass stock sheet offers superior strength and excellent corrosion resistance, typical of its alloy composition (e.g., UNS C26000 or similar). The precise 0.257-inch thickness, combined with the generous 42-inch by 42-inch dimensions, ensures compatibility with a wide range of fabrication processes, including stamping, machining, and bending. Its high electrical conductivity makes it suitable for electrical components and connectors, while its thermal conductivity is advantageous for heat exchange applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and free of contaminants. 2. Accurately measure and cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Deburr all edges to prevent snags and ensure safe handling.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard sheet metal tools not rated for thicker brass | Employ industrial-grade cutting, bending, and stamping equipment specifically designed for 0.257" thick materials to prevent tool damage and ensure precision. |
| Inadequate edge preparation after cutting | Thoroughly deburr all cut edges with a file or deburring tool to remove sharp edges, improving safety and preventing potential material stress concentrations. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical connectors and terminals, Heat exchangers and plumbing components, Decorative and architectural metalwork.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||