This 0.253-inch thick polycarbonate stock sheet offers superior impact resistance and clarity. Measuring 30 inches by 16 inches, it's engineered for durability in demanding industrial applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.253" |
| Length | 30" |
| Width | 16" |
Built to exacting engineering tolerances, this 0.253" polycarbonate stock sheet offers exceptional dimensional stability and impact strength, crucial for precision manufacturing and protective applications. Composed of high-grade polycarbonate resin, it exhibits excellent optical clarity and resistance to a wide range of chemicals and abrasion. The 30" x 16" dimensions provide ample surface area for fabricating custom jigs, fixtures, templates, machine guards, and protective enclosures where durability and visibility are paramount. Its inherent toughness minimizes the risk of shattering under stress, ensuring operational safety and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the installation surface thoroughly to remove any debris or contaminants. 2. Position the polycarbonate sheet according to your design specifications and mark any necessary cut lines or mounting points. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, leading to potential cracking. | Maintain adequate edge distance when drilling; consider using washers when fastening to distribute load. |
| Using abrasive cleaning agents that can scratch the polycarbonate surface. | Employ mild soap and water or specialized polycarbonate cleaners for maintenance. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Custom Jigs and Fixtures, Machine Guarding, Protective Barriers, Templates and Prototypes, Display Cases.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||