This robust 0.245-inch thick carbon steel stock sheet, measuring 23 by 30 inches, is engineered for demanding industrial shipping and packaging applications. Its substantial gauge offers exceptional rigidity and impact resistance.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.245" |
| Length | 23" |
| Width | 30" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a nominal thickness of 0.245 inches (approximately 6.22 mm), with precise dimensions of 23 inches (584.2 mm) in length and 30 inches (762 mm) in width. The carbon steel composition ensures superior tensile strength, yield strength, and hardness, making it resistant to deformation under significant load. Its inherent durability provides excellent protection against punctures, crushing, and environmental factors, ideal for heavy-duty containment and structural reinforcement in shipping crates, pallets, and protective packaging systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Position the carbon steel sheet according to design requirements. 3. Secure the sheet using appropriate fastening methods such as welding, riveting, or bolting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard gauge steel for heavy-duty loads. | Always verify the load-bearing capacity and select the appropriate thickness, like this 0.245" carbon steel, for demanding applications. |
| Inadequate surface preparation before assembly. | Clean the steel surface thoroughly to remove any oils, grease, or rust to ensure proper adhesion and structural integrity during fastening. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty shipping crates, Reinforced pallets, Protective enclosures for industrial equipment, Customizable bracing and structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||