This premium lubricating nylon stock sheet is engineered for superior performance in demanding industrial environments. Its exceptional wear resistance and self-lubricating properties minimize friction and extend component life.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.243" |
| Length | 33" |
| Width | 39" |
Purpose-built for heavy-duty applications, this Nylon Stock Sheet offers exceptional wear resistance, a low coefficient of friction, and excellent chemical inertness. Measuring 0.243 inches thick, 33 inches in length, and 39 inches in width, its inherent lubricity makes it ideal for reducing wear in sliding components, bushings, bearings, and wear pads across various industrial sectors. The material's ability to withstand significant loads and operate with minimal lubrication ensures prolonged service life in high-friction scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Machine the nylon stock to the required dimensions using standard cutting tools, taking care to avoid excessive heat buildup. 3. Securely fasten the fabricated nylon component to its intended application, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Machining at excessively high speeds leading to melting or delamination. | Utilize sharp tooling and moderate cutting speeds with adequate coolant to dissipate heat during machining. |
| Over-tightening fasteners, causing stress cracking or deformation of the nylon. | Apply appropriate torque values for fasteners and consider using larger washers to distribute load if necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Self-Lubricating Bushings, Slide Plates and Rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||