This 0.243" thick brass stock sheet, measuring 39"x35", is engineered for superior performance in suspending and bracing applications. Its inherent strength and corrosion resistance make it ideal for demanding environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.243" |
| Length | 39" |
| Width | 35" |
Manufactured under strict quality controls, this brass stock sheet boasts a thickness of 0.243 inches, a length of 39 inches, and a width of 35 inches. Composed of high-purity brass, it exhibits excellent tensile strength, ductility, and superb corrosion resistance against a wide range of chemicals and environmental factors. This combination of properties ensures longevity and structural integrity in critical load-bearing and support systems, making it a reliable choice for critical infrastructure and industrial equipment. The material's machinability and formability allow for precise customization to meet specific project requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut brass components using compatible fasteners and approved structural adhesives, adhering to load-bearing specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners which can lead to premature failure of the bracing system. | Always select fasteners with appropriate shear and tensile strength ratings that exceed the calculated load requirements for the application. |
| Inadequate surface preparation prior to fastening, resulting in poor adhesion or potential corrosion initiation. | Thoroughly clean and degrease all mating surfaces of the brass sheet and the substrate to ensure optimal contact and prevent galvanic corrosion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Industrial structural bracing, Custom support components, Electrical grounding infrastructure.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||