This high-quality brass stock sheet is engineered for superior lubricating performance. Its precise dimensions and inherent material properties make it ideal for demanding industrial applications requiring reduced friction and wear.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.240" |
| Length | 29" |
| Width | 18" |
Trusted by engineers across multiple sectors, this brass stock sheet (0.240" thickness, 29" length, 18" width) offers exceptional wear resistance and low friction coefficients. Composed of a specialized brass alloy, it exhibits excellent machinability and corrosion resistance, making it a preferred material for bearings, bushings, and sliding components in machinery. Its ability to retain lubricant effectively ensures sustained performance and extended component life in high-stress environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Accurately cut the brass sheet to the required dimensions for the component. 3. Securely fasten the fabricated brass component to the designated assembly, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard brass alloy instead of a lubricating grade. | Select a brass alloy specifically formulated for lubricating properties to ensure optimal friction reduction and wear resistance. |
| Insufficient surface preparation of mating components. | Thoroughly clean and, if applicable, roughen the surface of the component against which the brass will slide to promote lubricant adhesion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Bushings and sleeves, Wear plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||